Home > Fall Protection Equipment >

SAPS SAP42H Safety Anchor Post System
SAPS SAP42H Safety Anchor Post System


 
Alternative Views:

For pricing information, click on the pricing tab below or call 614-876-8698.

Description Specs Pricing
 
SAPS SAP42H Safety Anchor Post System for use in all concrete construction. The post is surface mounted to the concrete. The SAPS Safety Anchor Post has a built-in stem coil rod that extends from the base. The protruding coil rod is threaded into the embedded insert. The SAPS post rotates clockwise by hand until it is secured. An attachment tightening arm provides final tensioning to the concrete slab. The SAPS SAP42H is a temporary guardrail post that exceeds OSHA's 200 lb side load requirements. The SAP42H has a unique rail clamping system that pinches the rails against the post rail bracket. Does not require cleating or rail sections. The vise clamp greatly reduces installation time of rails and does not damage wood rails allowing re-use on the next job. The rail brackets on the post rotate for ease of installation. Kick plate bracket available when required. The average time to install 32 feet of SAPS guardrail including rails 2 to 2-1/2 minutes. Your fall protection needs can be met by ordering your precast with preset embeds. Ideal for precast girder beams for bridges, precast box girder bridge segments and precast culverts for easy access and water proofing application. Use Hilti HDL, 3-3/16" or Simpson DIAB7S, 3-1/4" drop-in anchors for cast in place use.